신고사유
신고해주신 내용은 쇼핑몰 운영자의 검토 후 내부 운영 정책에 의해 처리가 진행됩니다.
* 제품마다 약간의 화이트 노이즈가 있을 수 있습니다.
불량이 아닌 제품의 특성이므로 해당 사유로는 교환이나 환불이 불가하니 구매 시 참고하여 주시기 바랍니다.
Keyboard:
C – C 37-notes (3 octaves), mini keyboard designed specifically for the MS-20 mini
Voltage Controlled Oscillator 1 (VCO 1):
Scale (32′, 16′, 8′, 4′) (6 octaves, +cent, -cent)
Wave form (Triangle, Sawtooth, PW-Square, White Noise) (4 modes)
Pulse width adjust 1:1 – 1:infinity
Voltage Controlled Oscillator 2 (VCO 2):
Scale (16′, 8′, 4′, 2′) (6 octaves, +cent, -cent)
Wave form (Sawtooth, Square, Pulse, Ring modulator) (4 modes)
Pitch (± 1 octave)
VCO Master control: Master tune (± 100cent):
Portamento (max. 10sec)
Frequency modulation intensity by MG/T.EXT (-5V – +5V)
Frequency modulation intensity by EG1/EXT (-5V – 0V)
VCO Mixer:
VCO 1 Level
VCO 2 Level
Voltage Controlled High Pass Filter (VCF HPF):
Cutoff frequency (50Hz – 15,000Hz)
Peak (flat – self OSC)
Cutoff frequency modulation intensity by MG/T.EXT (-5V – +5V)
Cutoff frequency modulation intensity by EG2/EXT (-5V – +5V)
Voltage Controlled Low Pass Filter (VCF LPF):
Cutoff frequency (50Hz – 15,000Hz)
Peak (flat – self OSC)
Cutoff frequency modulation intensity by MG/T.EXT (-5V – +5V)
Cutoff frequency modulation intensity by EG2/EXT (-5V – +5V)
Envelope Generator 1:
Delay time (10sec)
Attack time (10sec)
Release time (10sec)
Envelope Generator 2:
Hold time (20sec)
Attack time (10sec)
Decay time (10sec)
Sustain level (0V – 5V)
Release time (10sec)
Modulation Generator (LFO):
Wave form (Positive Sawtooth – Triangle – Negative Sawtooth, Wide Pulse – Square – Narrow Pulse)
Frequency (0.1Hz – 20Hz)
Manual controller:
Control wheel (center click)
Momentary switch –>GND
Power switch and Volume:
Volume
Indicator:
LED (KBD trigger, Modulation Generator rate, Power ON )
Control section:
Input signal level
Low cut frequency (50Hz – 2,500Hz)
High cut frequency (100Hz – 5,000Hz)
CV adjust
Threshold level
Input and Output:
Signal In
Amplifier Out
Band pass filter Out
CV Out (0 – +8.4V)
ENV Out (0 – +5V)
Trig Out (+5V–>GND)
Indicator (LED):
Peak indicator
Trigger indicator
Keyboard:
Keyboard control voltage output (Exponential) (0 – +8V)
Keyboard trigger output (+5V–>GND)
VCO-1 + VCO-2 control voltage input (Linear response)(0 – +8V)
VCO-2 control voltage input (Linear response) (0 – +8V)
VCO:
VCO-1 + VCO-2 external frequency control input (OCT/V) (-5V – +5V)
VCF:
External signal input (3Vp-p max.)
External High pass filter cutoff frequency control input (2OCT/V) (-5V – +5V)
External Low pass filter cutoff frequency control input (2OCT/V) (-5V – +5V)
VCO + VCF:
Total external modulation input (T.EXT)(-5V – +5V)
VCA:
External initial gain control input (0 – +5V)
EG:
EG 1 envelope signal normal output (-5V – 0V)
EG 1 envelope signal reverse output (+5V – 0V)
EG 1 + EG 2 trigger input (–>GND)
EG 1 trigger input (–>GND)
EG 2 envelope signal reverse output (+5V – 0V)
MG:
Triangle output (Positive Sawtooth – Triangle – Negative Sawtooth) (5Vp-p)
Rectangle output (Wide Pulse – Square – Narrow Pulse)(0 – +5V)
Noise Generator:
Pink noise output (5Vp-p)
White noise output (5Vp-p)
Sample and Hold:
Clock trigger input (–>GND)
Sample signal input (5Vp-p max.)
S/H output (5Vp-p max.)
Modulation VCA:
Control voltage input (0 – +5V)
Signal input (-5V – +5V)
Signal output (-5V – +5V)
Manual controller:
Control wheel output (-5V+5V)
Momentary switch output (–>GND)
Signal out:
Signal output (mono 1/8″ mini phone jack, 2Vp-p output impedance 3.5k Ω)
Head phones:
Head phones output (Stereo 1/8″ mini phone jack, 33 Ω 48mW)
USB:
Type B, USB-MIDI Input/Output
* Only note messages (velocity is not used) can be transmitted and received.
MIDI:
MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
Power Consumption:
9W
Power Supply:
DC 9V
Dimensions (W x D x H): a
493 × 257 × 208 mm / 19.41 x 10.12 x 8.19 inches
Weight:
4.8 kg / 10.58 lbs.
Accessories:
AC adaptor (9V / 1.7A), Patch Cord x 10
*Specifications and appearance are subject to change without notice for improvement.
게시물이 없습니다
게시물이 없습니다
교환 및 반품 주소
- [04048] 서울특별시 은평구 증산로 297 7F, Ringo
교환 및 반품이 가능한 경우
- 계약내용에 관한 서면을 받은 날부터 7일. 단, 그 서면을 받은 때보다 재화등의 공급이 늦게 이루어진 경우에는 재화등을 공급받거나 재화등의 공급이 시작된 날부터 7일 이내
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과 다르거나 계약내용과 다르게 이행된 때에는 당해 재화 등을 공급받은 날 부터 3월이내, 그사실을 알게 된 날 또는 알 수 있었던 날부터 30일이내
교환 및 반품이 불가능한 경우
- 이용자에게 책임 있는 사유로 재화 등이 멸실 또는 훼손된 경우. 재화 등의 내용을 확인하기 위하여 포장 등을 훼손한 경우에도 새상품으로 판매가 불가하기에 환불이 불가합니다.
- 이용자의 사용 또는 일부 소비에 의하여 재화 등의 가치가 현저히 감소한 경우
- 시간의 경과에 의하여 재판매가 곤란할 정도로 재화등의 가치가 현저히 감소한 경우
- 복제가 가능한 재화등의 포장을 훼손한 경우
- 개별 주문 생산되는 재화 등 청약철회시 판매자에게 회복할 수 없는 피해가 예상되어 소비자의 사전 동의를 얻은 경우
- 디지털 콘텐츠의 제공이 개시된 경우
- 케이블류는 반품이 불가합니다.
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.